User Manual MX Series Voice Gateway
20
New Rock Technologies, Inc.
Indicator
Status
Description
Blinking green
Calling
Off
Registration has not started.
WAN
(green)
Steady green
A WAN connection is established without any service flow.
Blinking green
A WAN connection is established with service flow.
Off
WAN interface is disconnected.
PC
(green)
Steady green
A link is connected without any service flow.
Blinking green
A service flow is being transmitted.
Off
A link is not connected.
VOICE
(Green-FXS,
yellow-FXO)
Indicates line type and device status:
Blinking yellow
The device is starting and the port is an FXO port.
Blinking green
The device is starting and the port is an FXS port.
Off
No line is detected. Possibly the voice interface card is not inserted or
the port is damaged.
Indicates running status:
Steady yellow
Calling in or out via an analog trunk.
Blinking yellow
Ringing of calling in for an analog trunk.
Steady green
Off-hook or call established
Blinking green
Ringing on incoming call
Off
The port is in idle status
Note: The device starts up for approximate 30s to indicate line type, then indicates running
status.
Indicator of button:
RST
To restore the MX8A to factory default, press the RST for more than 3 seconds and release it
when the STU light starts blinking in red. This setting will be valid after rebooting the device.
1.3.3 MX60
Designed with a 1U high and 19-inch wide compact chassis, MX60 is suitable for installation in a standard
cabinet. MX60 has a built-in power module with the rating voltage of 100-240 V AC or -48 V DC (DC is
optional). The interface card of MX60 uses a RJ-45 socket and is connected to the distribution panel in
equipment room using CAT-5 cables supplied with the unit. MX60 offers up to 48 interfaces of FXS/FXO.
MX60 supports the following types of configuration.
Table 1-11 Configuration Combination of MX60
Models
Number of FXS Ports
Number of FXO Ports
MX60-16S
16
0
MX60-32S
32
0
MX60-48S
48
0
MX60-16FXO
0
16
MX60-32FXO
0
32
MX60-48FXO
0
48
MX60-8S/8
8
8
