User Manual MX Series Voice Gateway
22
New Rock Technologies, Inc.
Table 1-13 Description of MX60 Back Panel
Item
Description
Ground Pole
PWR/STU/ALM
Indicator, see Table 1-14 for description
USB
USB interface
CON
Configuration interface (CON), Ethernet lines used for local management and debugging
ETH1/ETH2
Two 10/100 Mbps Ethernet ports (RJ45). They share one IP address, which by default is
192.168.2.240, and you can change it on
Basic > Network
page.
Cooling fan
AC power socket, 100-240 VAC voltage input.
DC power socket,-48 VDC input.
Table 1-14 Meanings of MX60 Indicators
Mark
Function
Status
Description
PWR
Power
Indication
Green
Power on
Off
Power off
STU
Status
Indication
Off
System locked and inactive
Blinking green
Normal operation
ALM
Alarm
Indication
Off
No alarms
Blinking red
New alarms occurred but not confirmed.
Steady Red
System in the process of powered up and not in the normal operation mode
Red
Alarms existed and all alarm information confirmed.
1.3.4 MX60E
MX60E is an upgrade product of MX60. Designed with a 1U high and 19-inch wide compact chassis,
MX60E is suitable for installation in a standard cabinet. MX60E has a built-in power module with the rating
voltage of 100-240 V AC or -48 V DC (DC is optional). Optionally, the device may use dual power supplies.
The interface card of MX60E uses a RJ-45 socket and is connected to the distribution panel in the equipment
room by using CAT-5 cables. MX60E offers up to 48 analog line ports and supports the following
configurations:
Table 1-15 Configuration Combination of MX60E
Models
Number of FXS Ports
Number of FXO Ports
MX60E-16S
16
0
MX60E-32S
32
0
MX60E-48S
48
0
MX60E-16FXO
0
16
MX60E-32FXO
0
32
MX60E-48FXO
0
48
