New Rock Technologies HX4E Series User Manual Download Page 14

Page: 14 / 125

User Manual MX Series Voice Gateway

New Rock Technologies, Inc.

Model

Voice
ports

Chassis

Installation

CPU

RAM

Flash

Power

MX120G

48- 96

19-inch
wide and 2U
High

Rack

TI A8, 1GHz

256MB

32MB

100-240
VAC, -36 to
-72

VDC

(optional)

Dual power
(optional)

Hardware for MX series gateways uses high-performance CPUs, ensuring that each product of the series

can achieve full-capacity concurrent calls with high speech quality.

MX gateways software adopts the stable and reliable embedded Linux operating system (OS),

implementing scores of business phone functions, including: call forwarding, call transfer, call hold,

teleconference, caller identification, Do Not Disturb, ring-back tone, hunt group simultaneous ring,

distinctive ring, one phone with two numbers, and fax. In addition, MX gateways are featured with FXO

port second stage dialing with voice prompt, routing table with a maximum of 500 entries, phone digit

manipulation, and PSTN failover upon power-off or network disconnection.

MX gateways support local and remote management operations through Web GUI or SSH, SNMPv2-

based and TR069/TR104/TR106-based centralized management schemes, and auto provisioning.

Maintenance tasks such as modifying configuration, upgrading software, collecting statistical data,

downloading logs, and fault alarms can be performed.

Note: PSTN failover upon power-off or network disconnection is supported by devices with both the FXS

port and the FXO port.

1.2 Functions and Features



Connect analog telephone, PBX, facsimile machine and POS machine to the IP core network, or
PSTN



Work with a service platform to provide various telephone supplementary services



Support protocols: SIP, MGCP



Support STUN. Detecting changes of the reflexive address of the device via STUN, and then
triggering re-registration to the SIP registrar server.



Flexible configuration of subscriber/trunk interfaces



Support G.711, G.729



Support echo cancellation



Up to 500 routing rules can be stored in gateways



Intercom



Support concurrent calls under full load



Support call progress tones for various countries and regions



Support Line second stage dialing or voice prompt



Support PSTN failover on power or network failure

Summary of Contents for HX4E Series






























































































































Search results

Summary of Contents for HX4E Series

Reviews:

Related manuals for HX4E Series

Brands by name

Popular brands

New Rock Technologies HX4E Series, User Manual

Search results

Summary of Contents for HX4E Series

Reviews:

Related manuals for HX4E Series

Brands by name

Popular brands