New Leader NL345/MULTAPPLIER, Operator'S Manual

Page: 41 / 142

- 41 -
NL345
www.NewLeader.com
(800) 363-1771
312884-AA-C
Hillside Divider & Conveyor Cover
NOTICE!
Highway Equipment Company will not be liable for misapplied material due to an improperly
adjusted divider, spreader or both�
Figure 19A - M
ulT
A
pplier
Hillside Divider
Loosen hardware from rear two chain shield holes
on each side of M
ulT
A
pplier
� Install M
ulT
A
pplier
Hillside Divider (A) and fasten to Support using
single bin Hillside Divider hardware removed
before M
ulT
A
pplier
installation (B)� Adjust Hillside
Divider so that the middle divider is centered
over both conveyors and the Material Divider
(C) as shown in Figure 19� Tighten all hardware
to recommended torque�
A
C (FRONT)
B
Figure 19B - M
ulT
A
pplier
Dual Conveyor Cover
Parts Needed:
Description Qty
Cover
1
Hair Pin
2
Insert Installation
B
C
A