New Leader NL345/MULTAPPLIER, Operator'S Manual

Page: 54 / 142

- 54 -
www.NewLeader.com
(800) 363-1771
312884-AA-C
NL345
Header
Inspection Ladder
WARNING
KEEP OFF FENDERS� Do not place objects on fenders� They are not intended to carry
loads� Falling from the fenders could cause death or serious injury�
NOTICE!
Figure 1 - Always place the inspection ladder in the storage position while unit is in transit with
rubber latches (A) secured�
A
A
A
A
Figure 1A - Inspection Ladder Down Figure 1B - Inspection Ladder Up
Back Plate Storage
Figure 2 - When spreading without the
Material Divider Back Plate (A) equipped,
it can be stored at the front of the unit�
A
A
Figure 2
Anti-Slab Chain Storage / Hillside Divider Panel
Figure 3A - Hook chains over rearmost cross member of Anti-Slab Support to position out of the way�
Figure 3B - Install Hillside Divider Panel on Anti-Slab Support with proper hardware� Adjust so that panel
is approximately 3/8” (1cm) above the rubber of the conveyor belt� See “Anti-Slab” in parts manual for
details�
General Operating Procedures