New Leader NL345/MULTAPPLIER, Operator'S Manual

Page: 70 / 142

- 70 -
www.NewLeader.com
(800) 363-1771
312884-AA-C
NL345
Lubrication & Maintenance Chart
WARNING
Shut off all power and allow all moving parts to come to rest before performing any
maintenance operation�
The spreader should be regularly lubricated with the lubricants recommended in this manual in accordance
with the following chart:
Location Places Method Frequency
Hydraulic System
Hydraulic Reservoir 1 Check Daily� Change Annually
Filter 1
Check daily; Change when
indicated by controller
Conveyor
Idler Bearings (1, 2 - Front Bank) 2
Grease Gun Weekly
Driveshaft Bearings (2, 3 - Rear
Bank)
2
Chain Oiler 1 Oil Mixture
Daily, After first 10 hours
spreading
Gearcase 1 Gear Oil Check Monthly; Change Annually
Feedgate
Jack Assembly (4 - Rear Bank) 2 Grease Gun Weekly
Spinner Assembly
Jack Assembly (4, 8 - Rear Bank) 2 Grease Gun Weekly
Bin 2 Insert Conveyor
Idler Bearings (9, 11 - Rear Bank) 2
Grease Gun Weekly
Driveshaft Bearings (10, 12 - Rear
Bank)
2
Idler Take -Up Screws 2
Hand
Grease
Annually
NOTE: Unusual conditions, such as excessive dust, temperature extremes or excessive moisture may
require more frequent lubrication of specific parts.
*See “Lubricant and Hydraulic Oil Specifications” for types of lubricants and oil to be used.