New Leader L5034 G4, Assembly/Operators/Parts Manual

Page: 93 / 154

- 88 -
www.NewLeader.com
(800) 363-1771
305438-J
L5034G4
Spread Pattern
Spread pattern is adjusted using one or more of the following:
• Point of material delivery on spinner discs
• Spinner speed
•
Angle of the distributor fins on the spinner discs
Since adjustments will vary for each job, trial and experience must be used to determine the adjustments
required to obtain the swath width and spread pattern desired�
Spread Pattern Test Kit
Spread Pattern Test Kit, part no� 313960, includes the following:
DESCRIPTION QTY DESCRIPTION QTY
Box - Plastic Storage 1 Scale – Density 1
Center Collection Tray - Blue 1 Data Sheet – 100 Ct�
Booklet
1
Collection Tray - Brown 22 Funnel 1
Divider Screen 23 Flag 5
Assy – Test Tube Rack 1 Rope – 120’ marked 1
Test Tube 23 Stake 2
NOTE: If desired, a material calibration kit is available to aid in measuring product quality� Contact your
local dealer for details�
Use great caution while working around the spreader� Contact with spinners and other
moving parts is very dangerous� Do not adjust while machinery is moving, wear eye
protection and avoid discharge from spinners� Do not ride on moving spreader� Failure to
comply with this requirement could result in death or serious injury�
Spinner assembly and material divider have NOT been adjusted at the factory� Before
spreading material, spread pattern tests must be conducted to properly adjust the spread
pattern� A spread pattern test kit is available for this purpose�
THE MANUFACTURER OF THIS SPREADER WILL NOT BE HELD LIABLE FOR MISAPPLIED
MATERIAL DUE TO AN IMPROPERLY ADJUSTED SPREADER�
Spread Pattern
Product quality will affect spread pattern and product performance� Spread pattern testing is required to
ensure proper application of material� Larger products will produce wider swath widths�