New Leader L5034 G4, Assembly/Operators/Parts Manual

Page: 80 / 154

- 76 -
www.NewLeader.com
(800) 363-1771
305438-J
L5034G4
2� Select bins:
• Select bins to be flushed by pressing enable
buttons next to each. To adjust conveyor RPM for
flush, press �
3� Set conveyor RPM:
• Use keypads to set conveyor RPM for each bin� 20
RPM is default�
• Bin 1 Maximum = 50 RPM
• Bin 2 Maximum = 60 RPM
• Bins 3 & 4 Maximum = 85 RPM
Press to continue�
4� Perform bin flush:
• To flush bins, press � Conveyors will run until
is pressed�
When process completes, press to continue�
Do not work near rotating spinners�
Severe injury can result from contact
with moving parts� Failure to comply
with this requirement could result in
death or serious injury�
• When exiting Bin Flush process, spinners will
restart� Plug PWM valves back in if it was
previously disabled� Press to continue�
Controller Operations