New Leader L5034 G4, Assembly/Operators/Parts Manual

Page: 38 / 154

- 35 -
L5034G4
www.NewLeader.com
(800) 363-1771
305438-J
The L5034G4 is a hopper type spreader intended for spreading feedlot manure, waste water sludge,
industrial waste, paper mill waste, compost, marl, poultry litter and fly ash. It is intended for truck chassis
or flotation vehicle mounting.
The unit is hydraulically powered and provides independent variable speed control for the spinner and full
automatic ground speed control for the conveyor� Tandem gear type hydraulic pumps provide the power
and are driven by a transmission PTO�
The 34” wide (86 cm) conveyor runs the full length of the hopper bottom to deliver material to the spinners
through a hydraulically adjustable metering gate at the rear of the hopper body� A feedgate sight gauge
allows monitoring of the feedgate opening from the cab� The conveyor is driven by dual 6-to-1 ratio spur
gear cases, each driven by a orbital type hydraulic motor�
Three conveyor options are available: pintle type chain joined by cross bars every third link (#1), every
other link (#2), or every link (#3)�
The distributor spinner assembly has two 30” (76cm) diameter discs� Each disc has the option of four
or six formed and heat treated fins that are adjustable to radial angle. The spinner is fully adjustable by
means of a rotating handle�
This product is intended for commercial use only�
General Description
Operations & Maintenance