New Leader Hi-Way XT3 TYPE II, Operator'S Manual

Page: 41 / 100

- 41 -
XT3 TYPE II
www.NewLeader.com
(800) 363-1771 316535-AA-A
Header Lubrication & Maintenance Chart
WARNING
Shut off all power and allow all moving parts to come to rest before performing any
maintenance operation.
The spreader should be regularly lubricated with the lubricants recommended in this manual in accordance
with the following chart:
LOCATION PLACES METHOD FREQUENCY
Pump Drive
Transmission
PTO
Slip Joint 1 Grease Gun Weekly
U-Joint 2 Grease Gun Monthly
Crankshaft PTO Sliding Spline 1 Grease Gun Weekly
U-Joint 2 Grease Gun Monthly
Hydraulics
Reservoir 1 Oil Check Daily; Change Annually
Filter 1 Check Daily; Change Element when Indicated
(Red)
Tailgate
Hinge Pins 2 Oil Monthly
Latch Pivots 2 Grease Gun Monthly
Latch Yoke Threads 2 Oil Monthly
Hoist Cylinder
Cylinder 2 Grease Gun Weekly
Hinge Point Fittings 2 Grease Gun Daily
Conveyor
Rear Bearings - Lube Bank 2 Grease Gun Weekly
Front Bearings 2 Grease Gun Weekly
NOTE: Unusual conditions, such as excessive dust, temperature extremes or excessive moisture may
require more frequent lubrication of speci fi c parts.
* See Lubricant and Hydraulic Oil Speci fi cations for types of lubricants and oil to be used.