New Leader Hi-Way XT3 TYPE II, Operator'S Manual

Page: 30 / 100

- 30 -
www.NewLeader.com
(800) 363-1771
316535-AA-A
XT3 TYPE II
Header
Front Spinner
Change spread pattern by adjusting spinner location. Loosen Hanger/Spinner hardware to move spinner
right/left as necessary. Loosen Hanger/Tube Mount hardware and slide spinner up/down or rotate spinner
forward/rearward as necessary. Make only one adjustment between spread pattern tests.
Feedgate
Adjust opening by removing pin near feedgate handle. Turn handle to adjust opening as necessary and
replace pin.
General Operating Procedures
Tailgate
NOTICE!
Laying the tailgate fl at is not recommended. New Leader Manufacturing is not responsible for
damage caused by such use.
Tailgate latches must be locked closed with clevis pins (not supplied) to prevent tailgate from dropping.
Attach chains from tailgate lift hooks to dump body lift hooks. With tailgate supported by a suitable lifting
device, remove lynch pins and hinge pins at top of tailgate to lay tailgate fl at. Use suitable lifting device
to carefully lower tailgate. Do not let tailgate hang below horizontal.