New Leader Hi-Way XT3 TYPE II, Operator'S Manual

Page: 12 / 100

- 12 -
www.NewLeader.com
(800) 363-1771
316535-AA-A
XT3 TYPE II
Header
Operations
General Safety Rules
DO NOT CLIMB OR STAND ON MACHINE
Figure 1.12 - Never allow any personnel to ride in or on the machine.
Use only inspection ladder or portable ladder to view the unit. Use
caution when getting on and off the ladder, especially in wet, icy,
snowy or muddy conditions. Clean mud, snow and ice from steps and
footwear.
Always maintain three-point contact with steps, ladders and
handholds. Face the machine when mounting and dismounting
inspection ladder. Do not jump off the machine.
Figure 1.12
OPERATE MACHINE SAFELY
Always walk around and visually inspect the machine before using. Check immediate vicinity of machine
for people and obstructions. Ensure adequate visibility.
Avoid distractions such as reading, eating or operating personal electronics that take your attention
away from operating the machine. Never operate the machine under the in fl uence of alcohol, drugs or
while otherwise impaired.
Always come to a complete stop before reversing. Be sure that all personnel are clear of machine path.
Turn around and look directly for best visibility. Ensure all rear view mirrors are properly installed and
adjusted. Use a signal person when backing if view is obstructed or when in close quarters.
Always disengage hydraulics before shutting down engine. DO NOT start engine with hydraulics
engaged.