New Leader Hi-Way XT3 TYPE II, Operator'S Manual

Page: 10 / 100

- 10 -
www.NewLeader.com
(800) 363-1771
316535-AA-A
XT3 TYPE II
Header
HANDLE HAZARDOUS MATERIALS SAFELY
Figure 1.5 - Materials to spread can be dangerous.
Improper selection, application, use or handling may be a hazard to
persons, animals, plants, crops or other property.
A Safety Data Sheet (SDS) provides speci fi c details on chemical
products: physical and health hazards, safety procedures and
emergency response techniques.
Check the SDS before starting any job using a hazardous material.
Follow all instructions and precautions given by the material
manufacturer.
Figure 1.5
WORK IN WELL-VENTILATED AREAS
WARNING
Never run machine engine inside a building unless
adequate ventilation is provided to safely and
properly remove exhaust fumes.
Figure 1.6 - Always work in a properly ventilated area.
Engine exhaust fumes can cause sickness or death. If it is necessary
to run an engine in an enclosed area, use proper equipment to safely
remove exhaust fumes from the working area.
Open building doors and get fresh air into the working area whenever
possible.
Figure 1.6
PROTECT AGAINST NOISE
Figure 1.7 - Long periods of exposure to high decibles or loud noise
can cause hearing impairment or loss.
Wear proper hearing protection during periods of exposure to high
decibels or loud noise.
Wear a proper hearing protective device such as earmuffs or earplugs
to protect against high decibels and / or uncomfortable loud noises.
Figure 1.7
Operations
General Safety Rules