New Leader Hi-Way XT3 TYPE II, Operator'S Manual

Page: 25 / 100

- 25 -
XT3 TYPE II
www.NewLeader.com
(800) 363-1771 316535-AA-A
Header
The XT3 is designed to haul, dump and spread. The fl at dump body fl oor allows hauling of pallets and
barrels. The front telescopic hoist provides a low center of gravity and eliminates the need for a sub-frame.
Heavy-duty 409 or 304 stainless steel inner and outer sills are fully welded to the XT3 fl oor to resist corrosion
and improve strength. One-piece construction of the fl oor and sides with a radius design reduces material
build-up.
The XT3 is comes with a 24-inch (610mm) conveyor bottom. Conveyor options include a #2 bar chain
conveyor, consisting of parallel strands of pintle chain joined by cross bars every other link, a #3 bar chain
conveyor with cross bars at every link, or a #4 belt-over-chain conveyor, consisting of moderately oil-
resistant (MOR) belting fastened to joining cross bars at every other link.
The quick-detach spinners move up/down, right/left and fore/aft for precise spread pattern control.
This product is intended for commercial use only.
General Description