0 - 14
SAFETY INSTRUCTIONS
F156.6 / F156.6A
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
ENTERING AND LEAVING
THE MACHINE
Use only the steps, platforms and
handrails provided when entering
and leaving the machine.
Always keep steps, platforms, han-
dles and handrails in a non-slip, safe
state and remove any oil, grease,
soil, clay, snow, ice and other foreign
matter immediately.
Always face the machine when en-
tering and leaving.
HAZARD RANGE
The hazard range is that zone around
the machine in which persons are
within reach of falling loads or falling
attachments due to operational
movements by the machine, to its
equipment and attachments or to
swinging loads.
PERSONS WITHIN THE HAZARD
ZONE
Always use the horn to warn persons
in the immediate vicinity of the ma-
chine before starting up the machine.
Ensure that no one sets foot in the
hazard zone of the machine. Interrupt
work until such persons have left the
hazard zone.
MARSHALLERS
The marshall must keep outside the
hazard zone.
Have a marshall to assist you:
- when you have no clear overview
over the hazard zone of the ma-
chine;
- when reversing;
- when shunting.
Use only those communication sig-
nals which you and the marshall un-
d e r s t a n d , o r u s e a i d s f o r
communication (e.g. walkie-talkie /
camera).
Calls cannot be understood by the
marshaller because of the noise
made by the machine during opera-
tion.
Keep in constant contact with the
marshaller.
Stop the machine immediately if you
lose contact with the marshaller.
SECURING THE MACHINE
Secure the machine as described in
the chapter "Securing the Machine"
before:
- mounting or dismantling the at-
tachment;
- parking the machine after daily op-
eration;
- carrying out any servicing or repair
work.