F156.6 / F156.6A
SAFETY INSTRUCTIONS
0 - 11
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
RIGHT SIDE
2.
The equipment can be secured at this point against
inadvertent activation
4.
Risk of injury
through hot or rotating components
in the engine compartment. Never open engine hood
until engine is stationary
5.
Risk of injury
through engine hood slamming
closed. Close engine hood by disengaging the safety
bar with your foot. Read Operation and Maintenance
Instructions Manual before carrying out any repair /
servicing work
6.
Risk of injury
through hot coolant. Open cap on ra-
diator only after the radiator has cooled down -
Coolant level indicators
7.
Risk of injury
by unauthorized starting of the ma-
chine. Before undertaking any work on the machine
shut off the engine and withdraw the key
8.
Fuel tank, fill in diesel only
9.
This sign indicates the admissible maximum speed
for driving on public roads
10.
Fixing points for fastening chains and ropes for ma-
chine transport
Always observe the warning and in-
struction signs attached to the ma-
chine.
Keep signs clean and legible.
Replace signs immediately if they
have become illegible.
New warning and instruction signs
can be ordered from the Spare-Parts
Service. The Part nos. required for
orders can be found in the Parts
Catalog of your machine.
12.
Risk of injury
through crushing. Never start up th
machine without ensuring that nobody is standing
within the range of the center-pivot joint
Risk of injury
through crushing. Never start up the
machine without ensuring that nobody is standing in
the area between the machine and a nearby obstacle
13.
Damage
to the alternator, regulator and electronic
modules may result from the battery being discon-
nected while the engine is running. Always stop the
engine before disconnecting and removing batteries
16.
Screen washer. Filler opening of screen-washer res-
ervoir. Top up with water
17.
Risk of injury
through crushing. Never start up the
machine without ensuring that nobody is standing in
the area between the machine and a nearby ob-
stacle.
18.
Fixing points for fastening chains and ropes for ma-
chine transport