6 - MAINTENANCE
Every 500 hours
Engine oil and filter
Replace the engine oil and the engine oil filter every
500 h
(after the break-in period).
Lubricant:
E
NGINE
O
IL
15W-40
Quantity:
6.7 L
(
1.8 US gal
)
NOTICE:
if engine is used with High Sulfur Fuel [
0.05%
(
500 ppm
) ≤ Sulfur Content ≤
0.5%
(
5000 ppm
)], change
the engine oil at shorter intervals (approximately half).
NOTICE:
if engine is used with High Sulfur Fuel [
0.5%
(
5000 ppm
) ≤ Sulfur Content ≤
1%
(
10000 ppm
)], change
the engine oil and oil filter at shorter intervals (approximately half).
NOTE:
replace the oil while the engine is warm, but not hot. Doing so helps the oil in flowing.
1. Park the machine on a flat and level place. Stop the
engine, remove the starter key.
2. Place a container with a capacity of
10 L
(
2.6 US gal
)
under the drain plug.
3. Remove the cover of drain plug
(2)
and connect the
special tool (Part Number 51477132)
(1)
.
4. Open the engine hood, remove the filling cap and drain
the oil.
SMIL18MEX0578AA
1
5. Clean around the filter head, remove the filter
(1)
with
a filter wrench and clean the gasket surface.
A. Open
B. Close
SMIL16MEX1443AB
2
6. Apply an oil film finely to the seal of a new filter.
SMIL14CEX2751AA
3
6-44
Summary of Contents for E37C
