NEW ENERGY BKDX30-95I/150/S, Manual

Page: 25 / 28

25
PCB damaged Substitution method Replace PCB
Machine does
not work
operation panel
no display
Transformer
damaged Measure with
multi-meter
Replace transformer
Operation panel
lines not connected
well
Check the circuitry
Welding with soldering
iron
Operation panel
damaged
Substitution method Replace operation panel
PCB damaged Substitution method Replace PCB
disturbed
Check the source of
interference Clear the source of
interference
If the line
lengthened by the
non-shielded cable
Replace the line(use
shielded cable)
Fan does not
work
Fan blade is stuck Check the fan blade Clear foreign body
The sub
High
pressure(fan
uninstall) system’
pressure over
high sub high pressure
switch damaged Check the sub high
pressure
Replace(short it)
Too
much refrigerant
Check the pressure
Discharge some
refrigerant
Water system dirty
Check if filter is
installed Clean water system and
install filter
Check water system
Clean
water system
Lack of water flow Check filter Clean filter
Water pump
damaged
Check water pump Replace water pump
Water flow of water
pump is small Measure the water
flow of water pump Change a biger water
pump
Without power
supply
Power cut off
Measure the
circuitry voltage
Wait for power supply
Circuit breaker Check the circuitry Connect the circuitry
PCB damaged (no
output) Measure the output
voltage
Replace PCB
Transformer
damaged
Measure the
winding and output
voltage
Replace transformer
Capacitor
damaged Capability become
smaller Check the capability
of the capacitor
Replace the capacitor