NEW ENERGY BKDX30-95I/150/S, Manual

Page: 17 / 28

17
d11. After throttling temperature
d12
Electronic expansion valve opening
（
displayed as the actual opening
）
2.2 Timing function
2.2.1 Timing maximum range is 24 hours, a minimum resolution of 1min.
2.2.2 Regular boot function: When turned off, to set the timer on in automatic boot time, if
already in the boot state, without treatment.
2.2.3 Sleep timer function: When running status to set the timer off automatically, if already in
a shutdown state, without treatment.
2.2.4 Repeat Timer function effectively only when the operation "ON / OFF" key to cancel the
timer function.
2.2.5 Timing error is less than 1 min / h.
Notice: Timing is calculated based on the time clock.
3. Display Function
3.1 Display Function explain
3.1.1 When the unit power on first time
，
the display panel is lit, after normal display, the
status display will display last power failure status, display the clock in the standby mode.
Booted in main interface there are set temperature, real-time temperature, shift automatically
follow the mode.
3.1.2 Tank mode display tank setting temperature, current water temperature. Use " ",
" " button to set the tank setting temperature.
3.1.3 Heating mode when selecting floor heating, display setting temperature, return water
temperature. Use " ", " " button to adjust the temperature setting.
3.1.4 Cooling mode display setting temperature, return water temperature. Use " " " "
button to adjust the temperature setting.
3.1.5 Automatic mode according to the actual operation mode display the setting temperature
of room or tank mode, current temperature with the actual operating mode display or return
water tank temperature. In turn on status can not be used " " " "" button to adjust the
set temperature.
3.1.6 Backlight
When key operation, the backlight is lit, if there is no key action within one minute, the