NEW BRUNSWICK SCIENTIFIC Scale Interface Box, Manual To Operations

Page: 36 / 62

36
M1295-0050 Scale Interface Box User’s Guide
Figure 5: Select Input Device Screen
6. Select the Input Type and Connector ID by clicking on your choice in the selection
box. For this controller, the Input Type is the RS-232. The Connector IDs for the
controller inputs are labeled as COMM1 through COMM8.
7. Click on OK to accept your selections.
8. The
DEVICE SETUP SCREEN
will appear. From this screen, you may choose the type
of scale you have connected to the controller and specify the data you wish to acquire
from the scale:
Click here
to select
“RS-232”
as the
Input Type.