NEW BRUNSWICK SCIENTIFIC Scale Interface Box, Manual To Operations

Page: 38 / 62

38
M1295-0050 Scale Interface Box User’s Guide
8.3 Display Gauge
The
MAIN DISPLAY SCREEN
comprises of a virtual or
DISPLAY GAUGE
for each
configured loop. Each gauge displays current values for that one loop. When a loop is
added, a corresponding display gauge automatically appears in the
MAIN DISPLAY
SCREEN
.
The following is an example of a typical display gauge:
Figure 7: Display Gauge
Although the Scale Interface Box is used to collect data from scales and load cells, end
users should be aware of the information available on the display screen:
CURRENT VALUE Displays the current value of the loop as a numerical value
and a bar graph.
MEASURED UNIT The unit of measurement of current output and setpoint.
8.4 Deleting Loops
1. Click on the Config button in the
MAIN DISPLAY SCREEN
. The
CONFIGURATION
SCREEN
will appear.
2. Select a loop from the loops list and click on the Delete button.
3. You will be prompted to enter the
SYSTEM CONFIGURATION PASSWORD
(unless the
SYSTEM CONFIGURATION PASSWORD
was set to blanks).
4. To delete the control loop, enter the password and press OK . To cancel this operation
click on Cancel .
SETPOINT BUTTON
CURRENT VALUE
(text)
MEASURED UNIT
LOOP CONTROL
MODE
CONTROLLER
CONTROL MODE
LOOP SETPOINT
CONTROLLER
OUTPUT %
CURRENT VALUE
(graphical)