NTI SERIMUX SERIES CONSOLE SWITCH
49
Telnet Base Port
Figure 54- Telnet Base Port page
Under “ADMINISTRATIVE SETTINGS” , select “Telnet Base Port”. On this page, the administrator will define the base port
number used to access the SERIMUX through Telnet. If the base port number is 7000 (the default value), then ports 1-8 would
be identified in Telnet as ports 7001 through 7008 respectively. If the base port is changed, to 7125 for example, then ports 1-8
would be identified in Telnet as ports 7126 through 7133 respectively.
Note: Once the Telnet Base Port number is changed, the SERIMUX must be restarted for the new number to take effect.
