NTI SERIMUX SERIES CONSOLE SWITCH
42
Modem Settings
Figure 43- Modem Settings page
Under “PORT CONFIGURATION”, select “Modem Settings”. This page displays the number, name, and connection status of
each port. As long as the connection status for a port is “No” (not connected), the modem settings can be changed. To proceed
to the “Change Modem Settings” page for any non-connected port, select the desired Port Name. The Change Modem Settings
page for the respective port will open.
Figure 44- Change Modem Settings page
The Change Modem Settings page provides boxes that can be edited with the modem communication characteristics associated
with each port. Refer to your modem instructions for appropriate settings to be applied here.
The “HangUp on “NO CARRIER” “setting only applies to some older modems. Usually, this option will remain “No”.
Once the desired changes have been made, press the “
Apply
” button to save the values. The changes will take effect
immediately.
To make connection with an attached modem, configure the fields as needed and press “
Attach
”.
To disconnect a modem in order to use the port for another device or user, press “
Detach
”.
