NTI SERIMUX SERIES CONSOLE SWITCH
43
Copy Port Settings
Figure 45- Copy Port Settings page
Under “PORT CONFIGURATION”, select “Copy Port Settings”. This page displays ports settings of each port on the SERIMUX,
and the connection status of each. From this page the administrator can easily copy the port settings of a port to as many other
ports as desired. This enables the administrator to save time when configuring the SERIMUX. As long as the connection status
of the port to copy and the port(s) to be pasted to is “No” (not connected), the port settings can be copied to another port.
To copy settings,
1. select a port number whose connection status is “No” in the “Copy From Port” box.
2. Place a check mark in the box to the right of each port the settings should be copied to.
3. Press
“
Paste
”. Settings will be immediately copied to the selected ports with immediate effect.
