NTI SERIMUX SERIES CONSOLE SWITCH
46
From the Change User Settings page, the administrator can:
•
configure how a user will be identified
•
assign the user access password
•
enable or disable a user’s access to the SERIMUX
•
apply administrative control rights to a user
•
define the timeout period for automatic disconnection
•
determine what initial screen a user will see when they log in
•
specify what ports the user will have access to
Field
Value
User Name
Maximum 15 characters
User Password
Maximum 31 characters (no characters= no password)
Confirm Password
Retype user password- if any
User Enable
Enable or Disable
Administrator Rights
Yes or No
User Timeout
0-90 minutes (0= never)
Command Line Initial User menu
Main menu
Host List
Terse Mode
To specify what ports a user will have access to; place a check mark in the “Access” box for each applicable port.
Copy User Settings
Figure 50- Copy User Settings page
Under “USER MANAGEMENT”, select “Copy User Settings”. This page displays the user name for each user defined in the
SERIMUX, and whether their access is enabled or disabled. From this page the administrator can easily copy a user’s
configuration settings to as many other users as desired. This enables the administrator to save time when configuring the
SERIMUX. As long as the access status of the user to be copied and the user(s) to have settings pasted to is “No” (not enabled),
the user settings can be copied to another user.
To copy settings,
1. select a user number whose enabled status is “No” in the “Copy From User” box.
2. Place a check mark in the box to the right of each user the settings should be copied to.
3. Press
“
Paste
”. Settings will be immediately copied to the selected users with immediate effect.
