NTI SERIMUX SERIES CONSOLE SWITCH
38
Disconnect Port Page
Figure 36- Disconnect Port page
Under “PORT CONFIGURATION”, select “Disconnect Port”. From this screen the administrator can disconnect any port
connection desired. Place a check mark in the check box to the right of any connected port and press “
Disconnect
” at the
bottom of the page. The associated port will be immediately disconnected and available for reconnection as needed.
Connect Two Host Ports
Figure 37- Connect Two Host Ports page
Under “PORT CONFIGURATION”, select “Connect Two Host Ports” . From this screen the administrator can select any two
ports to be connected to each other. Place a check mark in check box to the right of any two ports and press “
Connect
” at the
bottom of the page. The associated ports will be immediately connected.
