NTI SERIMUX SERIES CONSOLE SWITCH
10
Login as the administrator
1. From the user terminal connected to port 0, open the terminal program (configured as described on page 8 under "SERIMUX
Quick Start").
2. Press
[
Enter
] on the keyboard, wait three (3) seconds, and the port will open to the "Accessible host list" for "User01",
logged in at "Port00".
3. Press
[
Esc
] to logout, and [
Y
] to confirm. A message will be displayed "Disconnecting user now"
4. Press
[
Spacebar
] or [
Enter
]. A prompt requesting a Username will appear.
5. Enter
administrator
or
root
(all lowercase letters) and press [
Enter
]. A prompt requesting a password will
appear.
6. Enter
nti
(all lowercase letters) and press [
Enter
]. The Administrator main menu will appear for user ROOT on port 0.
Note: This will only enter the administrator mode if the administrator password has not yet been changed from "nti".
FYI: If SERIMUX is not at initial power-ON, omit steps 2 and 3 above to login.
Figure 7- Administrator main menu
FYI: The Administrator main menu will also appear if a user with administrative privileges presses [
4
] from the User main
menu.
From the Administrator main menu, the following options are possible
:
Function
Description
Keystroke
Port List
Display the port list
[1]
Port settings
View or modify any port settings
[2]
Port disconnect
Disconnect any port and logout the user logged in or connected to the port
[3] + [port #]
Port Connect
Connect to any port .
[4] + [port #]
User list
Display the user list
[5]
User settings
View or modify user settings
[6]
User disconnect/logout
Disconnect and logout any user connected to a port
[7]
Advanced settings
View or modify advanced administrative settings (pg 21)
[8]
Return to user menu
Leave the administrative menu and return to the User main menu (only
listed when a user with administrative rights is logged in)
[9]
Logout
Logout from SERIMUX
[0]
