Network Security QGSA-5120-A1 User Manual Download

Page: 54 / 64

Troubleshooting

Appliance Network Errors

WAN DNS can’t resolve QG URL

Ensure the WAN’s configured DNS servers can resolve the
Qualys Platform URL. See

www.qualys.com/platform-

identification/

for platform URLs.

Invalid LAN IP configuration

Ensure a valid IP address is assigned to the LAN interface.

Invalid WAN IP configuration

Ensure a valid IP address is assigned to the WAN interface.

LAN DNS can’t resolve proxy

Ensure LAN DNS server(s) can resolve the scanner’s
configured proxy hostname.

WAN DNS can’t resolve proxy

Ensure WAN DNS server(s) can resolve the scanner’s
configured proxy hostname.

LAN DHCP lease has no gateway

Ensure DHCP server is assigning a valid gateway for LAN
interface.

WAN DHCP lease has no gateway

Ensure DHCP server is assigning a valid gateway for WAN
interface.

Duplicate LAN and WAN config

LAN and WAN must be on different subnets.

LAN DNS server not reachable

Ensure LAN interface has network connectivity to its
configured DNS servers.

WAN DNS server not reachable

Ensure WAN interface has network connectivity to its
configured DNS servers.

LAN and WAN same gateway

LAN and WAN must be configured with different subnets
and gateway addresses.

Duplicate IP detected

Ensure LAN/WAN is configured with an IP address that is not
already in use by another host on the network.

Proxy Errors

Invalid proxy IP

Ensure proxy configuration on the scanner is configured
with a valid IP address for the proxy.

Invalid proxy auth config

Ensure proxy configuration on the scanner is configured
with valid proxy username and password.

unexpected proxy HTTP/403

Ensure configured proxy user on the scanner has
authorization to connect to the Qualys Platform.

unexpected proxy HTTP/407

Ensure the scanner is configured with valid proxy username
and password.

unexpected proxy HTTP/503

Ensure the proxy server can connect to the Qualys Platform.

Error

Solution

Summary of Contents for QGSA-5120-A1

































































Search results

Summary of Contents for QGSA-5120-A1

Reviews:

Related manuals for QGSA-5120-A1

Brands by name

Popular brands

Network Security QGSA-5120-A1, User Manual

Search results

Summary of Contents for QGSA-5120-A1

Reviews:

Related manuals for QGSA-5120-A1

Brands by name

Popular brands