Network Security QGSA-5120-A1, User Manual

Page: 35 / 64

Scanner Appliance Tour
Proxy Configuration
35
2
When the PROXY PORT: prompt appears, enter the port number assigned to the
Proxy server. Port “0443” appears in the screen by default. Confirm that the port
number shown is correct or enter a different one, if necessary. When the correct
port number appears, press ENTER
to continue.
Supported Characters: numbers only
3
When the PROXY USER: prompt appears, enter the user name for Proxy
authentication. If authentication is not enabled at the Proxy level, leave the entry
field blank. Press ENTER
to continue.
Supported Characters: Lower case letters, upper case letters, numbers, and these
special characters: _-\@. (including dot).
4
When the PROXY PASSW prompt appears, enter the password for Proxy
authentication. If authentication is not enabled at the Proxy level, leave the entry
field blank. Press ENTER
to continue.
Supported Characters: Lower case letters, upper case letters, numbers, and these
special characters: _-\/|~!?@#$%^&*+=(){}[]<>:;"`,. (including dot).
5
When the REALLY ENABLE PROXY? prompt appears, press ENTER to continue. Or
press the Up arrow two times to quit this procedure and return to the
SETUP NETWORK menu option.
6
Review the confirmation messages. The
ENABLING PROXY SUPPORT
message
appears followed by other messages while the Scanner Appliance attempts to
make a connection to the Qualys Cloud Platform using the new configuration.
7
Upon success the SCANNER APPLIANCE NAME–IP ADDRESS message appears and
the configured proxy is now confirmed working and being used.