Network Security QGSA-5120-A1, User Manual

Page: 15 / 64

Get Started
Quick Start
15
Scanner Appliance Name and IP Address
The Scanner Appliance name and IP address appear as shown below.
The Scanner Appliance name displayed is “is_ username ”, where username is your
Qualys user name. The name can be changed using the Qualys user interface.
The IP address is available for information purposes only. The Scanner Appliance
is remote controlled by the Qualys Cloud Platform, and the Appliance does not
allow incoming logins or connections from the network. If split network
configuration is enabled, the IP address for the LAN interface is displayed.
The Qualys Cloud Platform indicator for your account appears in the lower right
corner.
Proper Shutdown
Just go to the LCD display on the front panel. Press the down arrow until
SYSTEM
SHUTDOWN
appears, and then press
ENTER
. When you see
REALLY SHUTDOWN SYSTEM?
press
ENTER
. You'll notice the Scanner Appliance lights and LEDs are turned off. Then you
can safely disconnect the power supply.
Don't want to use the LCD interface? No problem, you can press the power button on the
back panel instead.