30
Monitoring the Fibre Channel disk
LED status on the
Fibre Channel disks
The following illustrations are of the third sheets of the quick reference cards that
come with your disk shelf.
Note
As of Data ONTAP 6.4.2 and later, drives that are idle perform a media scan in
the background resulting in the LEDs pulsing every half second.
For DS14 and DS14mk2 FC:
The following illustration is a correction of the
third sheet of the quick reference cards that come with your disk shelf.
Reinsert drive.
Replace drive.
Check console messages
- SES device fault bit set -
- SES device fault bit set -
Find a physical drive identified by software.
- SES device identification set -
- SES device identification set -
- Disk port is bypassed by ESH (either port A or B) -
- Disk port is bypassed by ESH (either port A or B) -
20
21
22
23
20
N
N
N
21
22
23
3
Summary of Contents for DiskShelf 14mk2 FC
Page 10: ...x Preface...
Page 41: ...Chapter 2 Monitoring the Disk Shelf 31 For DS14mk4 FC...
Page 42: ...32 Monitoring the Fibre Channel disk...
Page 106: ...96 Index...
