62
Replacing an LRC/ESH/ESH2/ESH4 module
11
From the storage controller console, enter the following command to
verify that the modules in Loop A report good status:
environ shelf
As long as only the modules in loop A are upgraded, you also receive
the following error message:
Element 1: component is from a different product family.
This is an unsupported configuration.
12
From the console of the filer, enter the following command to enable
the Loop A:
storage enable adapter
adaptername
13
through
for Loop B.
Step
Action
Summary of Contents for DiskShelf 14mk2 FC
Page 10: ...x Preface...
Page 41: ...Chapter 2 Monitoring the Disk Shelf 31 For DS14mk4 FC...
Page 42: ...32 Monitoring the Fibre Channel disk...
Page 106: ...96 Index...
