Installation
The glass break detection is expandable for a large window or multiple windows by
connecting the sensors in series to Z311C, as illustrated in the figure bellow. Z311C uses
GS-380S glass beak sensor and can be connected in series up to a maximum of 10.
Note: If you do not wish to connect the extended magnetic contacts or/and the glass
sensor on the device, please keep the supplied jumper head attached on the pin
connection otherwise Z311C will not function properly.
9
Make sure that the glass and magnetic contact sensor should not be swapped. The
correct connection configuration is shown in the figure bellow or in the first page.
9
Do not connect glass sensor on the top in where extended magnetic contact should be.
9
Make sure the jumper is connected if the extended magnetic contact cable is detached.
Glass break
Sensor 1
。。。。。。
Glass break
Sensor 2
Glass break
Sensor 3
Glass break
Sensor 4
Figure 3: Installation guide
