ZiG-BUTLER
*
This section is for ZiG-BUTLER software user only
During device installation, you will go though permit join and device pairing. Most of
the time you need to physically access to a device that is out of your reach. It
becomes handy when you can program through a software on a PC wirelessly
things becomes much easier. Our ZiG-BUTLER allows you to do that. Of course,
any other 3
rd
party ZigBee enabled software is also applicable.
ZiG-BUTLER software is to be installed on a PC or a server. The system needs a
Z103 USB dongle or a ZigBee to PC hardware interface such as a Z202 gateway to
communicate with the ZigBee network.
Join Z311CA into the network
If your ZiG-BUTLER sees a coordinator or a router device, you should be able to
see the icon similar to the one bellow:
