24
My-Netti.com
While making the adjustment, there
must be no load on the foot plates.
For outdoor use, there should be a
clearance of 40-50 mm between the
foot plate and the ground.
Never stand on the foot plates due
to the risk of tipping forward.
Removing the leg support:
if there is a foot plate lock, release the
foot plate by pulling the red plastic lock
between the foot plates
• Lift the right foot plate up.
• Lift the leg support in the knee joint
sligthly up.
• Swing it outwards - see picture below
• Lift it up.
When adjusting leg support
angle, be aware of squeeze
hazard between moving parts.
Foot plate angle adjustment
:
• Loosen the screw on the outside of the
foot plate - see picture above - with an
allen key.
• Tilt the foot plate to required angle and
tighten the screw.
5 mm unbrakonøkkel
Foot plate lock
Locking and releasing the foot plates
• The foot plates can be deliverd with a lock
connecting the 2 footplates which
makes the plates stronger.
• To lock the foot plates, let the right foot
plate fall over the bolt standing out
from the left one, it clicks into lock.
• To release the foot plate pull the plastic
lock between the foot plates and lift
the right foot plate up.
Model:
Netti III and Netti III HD
Language:
English
Version:
2017-06
