27
My-Netti.com
Model:
Netti III and Netti III HD
Language:
English
Version:
2017-06
Calf support adjustments
the calf support is height and depth
adjustable. the calf supports are to be
adjusted in a height and depth that
prevents the feet from sliding down from
the foot plate.
to adjust the height, loosen the screw on
the calf support bracket and slide it into
required position before fixing the screw.
5 mm Allen key
to adjust in depth of the calf pad, loosen
the screw holding the calf support and
slide it to required position before fixing
the screw again.
5 mm Allen key
Never stand on the foot plates!
Never lift the wheelchair by the
leg supports.
6.15 HEAD
SUPPORT
a - lever for
depth adjustment
B - Wheel for
angle adjustment
C - lever for
height adjustment
D - Head support
bracket.
•Place the squared nut in the trace of the
head support bracket as shown below.
• Place the head support in the head
support bracket.
• The height and the depth of the head
support is set to the required positions
and tightened.
• The head support bracket is fixed by
tightening the four screws two by two
diagonally so the bracket is fixed with
the same strength divided on the four
screws.
Adjusting the head support in depth:
• Release the locking lever on top of the
vertical bar (a).
• Adjust the head support and fix it in
required position.
Adjusting the head support in height:
• Release the locking lever on the head
support adapter (C).
• Adjust the head support and fix it in
required position.
Adjusting the head support in angle:
• Release the adjustment wheel at the rear
of the horizontal bar (B).
• Adjust the head support and fix it in
required position.
