23
My-Netti.com
Model:
Netti III and Netti III HD
Language:
English
Version:
2017-06
6.13 ADJUSTING THE VELCRO
BACK
• Loosen the straps, and place the back
rest cushion so that user gets room for the
bottom and the integrated lumbar support
in correct position.
• Tighten the straps so that they follow the
curvature of the spine and gives a little
extra support at the top of the sacrum.
6.14 LEG SUPPORTS
Netti iii has following alternative leg
supports:
• Universal leg support
• Angle adjustable leg support standard
• Angle adjustable leg support HD
• Amputation leg support
see chapter 5 for pictures.
as standard Netti iii is delivered with
angel adjustabel leg support. Netti iii HD is
delivered with angle adjustable leg support
HD
the angle adjustable leg supports are
swingable, height adjustable and removable.
they come with height- and depth
adjustable calf supports. the foot plates are
hinged, and can be angled in fixed positions.
the foot plates come with a lock connecting
the 2 plates which makes the plates
stronger. if locking is not wanted, the bolt
can be removed by using an allen key with
no loss of functionality.
MOUNTING OF ANGLE ADJUSTABLE LEG
SUPPORT STANDARD:
Leg support mounting instruction:
• Fold the foot plates up.
• Hold the leg support on the top joint,
and place it in the pull-out-piece in an
outward turned angle as shown in the
picture below.
• Swing the leg support inwards and push
slightly downwards
until it goes into
locked position.
Angle adjustment
loosen the star wheel
on the outside of the
leg support. lift the
lower part of the leg
support to required
angle.
tighten the star wheel.,
Be aware of squeeze hazard between
moving parts.
Foot plate height adjustment:
the foot plates are step less height
adjustable.
• Unfix the adjustment screw so that the
adjustment bar moves freely.
• Slide the foot plate to required height,
tighten the screw.
As an
accessory a
star knob can
replace the
screw.
