29
My-Netti.com
1
2
Model:
Netti III and Netti III HD
Language:
English
Version:
2017-06
Check that the brakes are correctly
adjusted by activating the brakes and be
sure that the wheelchair doesn’t move.
The brakes are constructed as parking
brakes and shall not be used as driving
brakes.
Be aware of potential squeeze hazard
between brake and tyre.
Drum brake
if the wheelchair is fitted with hand operated
hub brakes, they operate drum barkes.
If the brake doesn’t brake properly:
to adjust the wire on one or both sides, adjust
the foot screw 2-4 rounds out. then re-check
the brakes.
If the wire is too loose:
adjust the foot screw all the way in. tighten
the wire by loosening the wire clamp before
pulling the wire further through it. tighten
the wire clamp, and adjust the foot screw out
again
1 pc 10mm open-end spanner.
To ensure the correct functions of
the wire, these must never be taut.
Operating and applying the brake
the wheelbase in drum brake is fitted
with hand operated hub brakes to allow
regulation of speed on hills and whilst
travelling along. these are located on
the push handles.
• To apply the brakes, pull the brake
levers (1) evenly and smoothly
towards handle and bring the wheel-
base to a stop.
• For activating and locking the parking
brake (2) press the lever (1) against
the push handle and lock the parking
brake with the finger. Be sure that
both parking brakes are locked.
• The parking brake will be released
when you press the lever (1) against
the push handle. it is locked with a
spring and this will release it.
Do not leave the user in the
wheelchair without activating the
parking brake.
