26
My-Netti.com
Model:
Netti III and Netti III HD
Language:
English
Version:
2017-06
Foot plate height adjustment:
the foot plates are step less height
adjustable.
• Unfix the adjustment screw so that the
adjustment bar moves freely.
• Slide the foot plate to required height,
then tighten the screw.
Foot plate angle adjustment:
• Unfix the 2 screws as shown below using
an 5 mm allen key.
• Adjust the foot plate to the required angle
and tighten the screws.
Foot plate depth adjustement:
• Unfix the 2 screws completely as shown
below, using an 5 mm allen key.
• Pull out the foot plate and loosen the
next 2 screws which has become visible.
• Slide the footplate forwards or backwards
to desired depth before refixing all screws.
•
Locking and releasing the foot plates
• The foot plates come with a lock
connecting the 2 foot plates which
makes the plates stronger.
• To lock the foot plates let the right foot
plate fall over the bolt standing out
from the left one, it clicks into lock.
• To release the foot plate push the plastic
knob under the right foot plate and lift
the right foot plate up.
While making the adjustment, there
must be no load on the foot plates.
For outdoor use, there should be a
clearance of 40-50 mm between the
foot plate and the ground.
Never stand on the foot plates due
to the risk of tipping forward.
When adjusting leg support
angle, be aware of squeeze
hazard between moving parts.
Removing the leg support:
• Release the foot plate by pushing the
red plastic knob under the right foot
plate and lift the right foot plate up..
• Pull the red circular grip on top of the
leg support and lift the support
upwards while turning it slightly
outwards. see illustration on next page.
