Payment Terminals |
Page 28 of 54
6.7 iWL250G
iWL250G uses GPRS or 3G for communication. It is delivered with a Base Station and power supply cable.
6.7.1 Base Station
The terminal is charged in the accompanying Base Station. Charging may also be done on-the-go via the side
micro-USB port. To install and charge an iWL250G, do as follows:
Connect the power cable
to the Base Station.
Connecting the Base Station to a Network
For an iWL250B to work, it must be associated with a Base Station within range. To change which Base Station
iWL250B is connected to, do as follows:
1. Press the button at the far left under the screen.
2. Select 0 – Telium manager.
3. Enter code 4302+OK.
4. Select Initialization > Hardware > Cradle setup > Association.
5. Now you can choose to add a new Base Station, select a Base Station, or delete a Base Station.
Place the terminal on the
Base Station.
The terminal will connect
and is then ready for use.
The new terminal comes
with a battery that has
been minimally charged.
The terminal must be
charged to perform to
the full.
6.7.2 SIM Card
Nets SIM cards are typically used for Move/3500 (4G/Wi-Fi) and are bundled with the delivery. This applies to
rental terminals only, not purchased terminals. There is an extra charge for purchased terminals. However,
customers are also free to use their own SIMs. Nets SIM cards enable roaming between the national networks
that are most prominent in the area of the merchant site, giving Nets SIM cards a clear advantage over other
SIM cards.
Insert the SIM card under the flap
labelled “SIM”.
Open the backside cover by pressing
the clips downwards.
Summary of Contents for COUNTERTOP iCT250E
Page 54: ...Bohemian Version EN 09 20...
