NetPing server room environmental monitoring solutions and IP power distribution units.
Copyright © NetPing east Co., Ltd / E-mail:
/ Phone: +886-2-23121582
[email protected] www.netpingdevice.com
.1.3.6.1.4.1.25728.8900.1.1.3.n
npIoLevelOut.n
Integer
READ/WRITE The line status in the "output" mode, where n is the line number, a number
from 1 to 4 inclusive.
Write “1” or “0” to switch the line to the appropriate state.
.1.3.6.1.4.1.25728.8900.1.1.6.n
npIoMemo.n
OctetString
READ
The memo (short description for the IO line), where n is the line number, a
number from 1 to 4 inclusive
.1.3.6.1.4.1.25728.8900.1.1.9.n
npIoPulseCounter.n
Counter32
READ/WRITE Pulse counter on the IO line. It is counted from the positive edge of the pulse
after filtering short pulses.
To force zero, write “0”. It also resets when the power is switched off, where:
n is the line number, a number from 1 to 4 inclusive
.1.3.6.1.4.1.25728.8900.1.1.12.n
npIoSinglePulseDuration.n
Integer
READ/WRITE The duration of one pulse at the output of the IO line (valid values are from
100 ms to 25 500 ms, in increments of 100 ms), where n is the line number,
a number from 1 to 4 inclusive
.1.3.6.1.4.1.25728.8900.1.1.13.n
npIoSinglePulseStart.n
Integer
READ/WRITE To supply a single pulse to the output of the IO line, write “1”. The pulse
duration is taken from the variable npIoSinglePulseDuration.n, where n is the
line number, a number from 1 to 4 inclusive