Motorized Smart Power Tower
20451B • 20451S • 20451W
EN
Dear user, Thank you for choosing our product. Please read this manual carefully for safe use!
This product uses PIC chip technology for maximum protection, and concealed design and built-in ease of use.
Fields of application:
Suitable for office desks, pedestals, conference tables, kitchen worktops, bookshelves and many other uses.
Use:
Press the button on the top of the product (cover), The product begins to rise. Once you reach the desired height, press the button again
to stop the extention socket at any height. The extention socket stops automatically when the maximum height is reached. To lower it
back into it’s place after use, press the button on the top of the device again (cover).
Main features
1. Anti-collision function, protection against impeded movement:
If the product collides with any other object while moving up or
down, the product stops moving. Remove the object that caused the problem and press the button again to restart the device in the
same direction as the previous movement.
2. Design:
The most important benefit of this product is that you can use it to create a more perfect and safer home design anywhere,
anytime without the extension of your modern kitchen or office.
3. USB charging:
Provides 5V charging such as mobile your own phone phones
4. IP20 water resistance:
the product conforms to IP20 waterproof design
Specification:
20451
Operating voltage
230V AC (50 Hz)
Max. amperage
16 A
Max. load
3500 W
USB max. charging current
max. 3.1 A
Max diameter
76 mm
Mounting diameter
60 mm
Mounting depth
380 mm
Length when closed
370 mm + 10 mm socket
Length when open
605 mm + 10 mm socket
Cable length
1.5 m
Cable type
3 x 1.5 mm² C19
Installation order:
(1) Saw a hole at the desired area at a 60mm radius with a hole saw. Please pay attention to direct sunlight, water and humid environment
when placing the item.
Install the hidden hub when it is open! (Before installation, turn on the power and press the button on the top to open it.) Before cutting
a hole, make sure the power cord reaches the wall outlet when the hood is open! Otherwise, the power cord may be tense, which
may cause operating problems.(During opening, the power cord moves with the distributor. This should be taken into account before
installation!)
(2) After you’re done with sawing the hole, please place the silicone sealing ring ( if necessary) and place the socket into the hole.
(3) Rotate the socket to the appropriate direction and twist the retaining ring from the bottom to the top.
Attention:
In the event of malfunctioning, please do not disassemble this product under any circumstances as improper assembly or service may
result in danger and injury.
