2. If the video signal is first being routed via a composite monitor, ensure the impedance switch
on the monitor is set to
open
, otherwise no picture will be seen on the DVRi screen.
3. Make all the necessary connections at the rear of the recorder, including power cable,
keyboard and mouse; the required connections will vary depending on the video signal being
input, display devices being used etc.
4. Switch on power supply at rear of recorder, position 1.
5. Insert a hard drive in to the receptacle at the front of the machine. Do this GENTLY.
Although the drives are ‘Hot Swappable’ we advise that drives are only inserted or removed
when unit is powered OFF.
6. Press the “power on” button on the front panel. The two LEDs on the front of the removable
drives should be on. The Green LED is a power indicator and the Red LED is a status
indicator for the fan, if the Red LED is on the fan is OK, if it is blinking then the fan is not
working correctly.
Note:
This is
not
a “power off” switch.
2.4
To Power-down the DVR Inspector/ DVRi Peli
•
Close all desktop applications
•
Click START from the Windows Tool Bar
•
Select
SHUTDOWN
•
With Shutdown selected, click OK
This will close Windows and switch off the PSU
DO NOT REMOVE MAINS CONNECTION BEFORE SHUTDOWN
NETmc Marine DVRi Manual rev. 5.3 May 2010
7 of 43
