is
ital
ctions, and the “Configuring
r.
If the encoder is already connected, this box is checked.
has been
ntered
Configuring Coab
. Connect the dig
video encoder following the manufacturer’s instru
1
the Encoder” instructions above.
2. Click Tools > Digital Video Setup from the Site module menu.
. Enter data as follows:
3
Digital Video Encoder
: Select Mnet from the drop-down list.
dress of the digital video encode
IP Address
: Enter the IP ad
Digital Video Encoder Connected
:
4. Click Test to check the connection. If the connection fails, check that the IP address
correctly, and that all the connections are securely attached.
e
NETmc Marine DVRi Manual rev. 5.3 May 2010
29 of 43
