Audio input:
Audio input to the DVRi Peli is either via the line in RCA sockets (e.g. from a diver comms system)
or via a standard microphone (see typical image below) plugged into the ¼” (6.35mm) mono jack
socket.
Frequency response: 80Hz – 12kHz
Impedance: 600
Ω
Sensitivity: -76dB @ 1kHz
¼“ (6.35mm) plug
Please ensure that no cables etc have been left on the surface of the DVRi Peli before closing the
lid, as this could damage the monitor.
2.3
Installation of Inspector with removable drive
1. Install the DVRi in a 19” rack giving consideration to the height at which the unit is mounted
to facilitate the easy removal of the hard drive.
Note1
: It is essential that sufficient space be allowed behind the recorder to allow the
power supply-cooling fan to function correctly.
Note2:
If networking the DVRi, all network connections must be made and the network be
live
before switching on the DVRi, otherwise no streaming video will be available.
NETmc Marine DVRi Manual rev. 5.3 May 2010
6 of 43
