background image

3.4.1 Black 

Box 

Recording 

Black box recording is an optional extra.  This option allows a separate, continuous recording of the 
whole operation, for example for health and safety purposes, independent of whether the video is 
currently recording.   This button will only be enabled if you have purchased the Black Box option. 
 

The following images indicate whether the Black Box is enabled or not: 

                               

 

 ENABLED 

DISABLED 

 

Recording 

If the Black Box option is enabled, clicking on this button will start recording. The button will now 
look like this:  

     

   

 

 
The presence of a green tick in the status bar is also necessary for Black Box recording.   This 
indicates that the housekeeping system is functioning, whereby old files are deleted to make way for 
new ones, enabling continuous recording.  If no green tick is present, the disk will eventually 
become full and recording will stop. 
 
Unless otherwise arranged, the Black Box will record to a separate 120 gigabyte hard disk drive 
called the D: Drive.   Depending on the quality settings chosen, the Black Box allows continuous 
recording for between 33 hours (highest quality settings) and 213 hours (lowest quality settings.) 
 
Black Box files are automatically saved under the time and date recorded and can be accessed 
through Windows. 

 

 

NETmc Marine DVRi Manual rev. 5.3 May 2010   

12 of 43

 

 

Summary of Contents for DVR Inspector












































Reviews: