3.5 Set-up
Page
After clicking the SETUP button you will see the following screen. Here you can configure the
recorder; setting the video format and compression rate, the length or size of the video files (PKTS)
and allocating the storage path and file names.
NOTE: Units with SDI input have a different set-up page (see Appendix xi)
The set-up settings of the DVRi can be changed, however the unit will have been shipped from the
factory configured with the optimal settings for your application– it is recommended that these be left
as shown above (settings for MPEG1) or at least a note is made of them to enable the unit to be
configured as it was when it left the factory.
NETmc Marine DVRi Manual rev. 5.3 May 2010
13 of 43
