- ENGLISH -
- 80 -
Activation menu
The
Activation
menu shows a screen like the one below.
/------------------------/
/ Activation /
/------------------------/
Enable telnet..:
[
ON
/off]
<--
Enable FTP.....:
[
ON
/off]
Enable HTTP....:
[
ON
/off]
Enable DataLog.:
[
ON
/off]
Enable Modem Tx:
[on/
OFF
]
Enable Modem Rx:
[on/
OFF
]
Enable SNMP....:
[on/
OFF
]
Enable Email...:
[
ON
/off]
Enable UDP.....:
[
ON
/off]
Enable Report..:
[
ON
/off]
With this menu the services implemented in
NetMan plus
can be
activated or deactivated:
NOTE:
use the ENTER
key to change the selected configuration (“ON” or “OFF”).
ON (green characters): service active
OFF (red characters): service not active
It is recommended to activate only the services used. The SNMP and Modem services are not
supported.
Services 2 menu
/------------------------/
/ Services 2 /
/------------------------/
WakeOnLan addr.:
<--
WakeOnLan delay:
Activation.2...:
Sensors config :
I/O Sensors....:
Threshold sens.:
With this menu the configuration screens of the various services can be accessed as described in
the following table.
Menù
Funzione
WakeOnLan addr.
To configure the Wake-on-LAN service
WakeOnLan delay
Activation 2
To configure the services to be activated
Sensors. config
To configure the environmental sensors
I/O Sensors
Threshold sens
