- ENGLISH -
- 54 -
N
ETWORK PORT
NetMan plus
connects to 10/100 Mbps Ethernet networks by means of connector RJ45 (see
paragraph “Specifications for the cabling of the network cable”). The LEDs built into the connector
describe the status of the network:
Left LED:
1. on and yellow if the 10/100Mbps mode link is present
2. on and green if the 10Mbps mode link is present
Right LED:
1. on and yellow during transmission in full-duplex mode
2. on and green during transmission in half-duplex mode
RS-232
COMMUNICATION PORT
NetMan plus
makes available a serial communication port through which it is possible to:
Configure
NetMan plus
(see paragraph “Configuration via RS-232 serial line”)
N
ETWORK SERVICES
NetMan plus
implements a series of services based on the main network protocols. These services
can be activated or deactivated according to requirements (see paragraph “Configuration”). A brief
description for each of these is given below.
Telnet
By means of a client telnet (available on all the main operating systems) a remote connection with
NetMan plus
can be established to change its configuration (see paragraph “Configuration via
telnet
”).
Wake-on-Lan
NetMan plus can send “Wake-on-Lan” commands to remotely start computers.
