- ENGLISH -
- 88 -
Pressing the ENTER
key corresponding to the “Firewall” command displays a screen like the one
shown below.
/------------------------/
/ Firewall /
/------------------------/
Access IP 1....:
*.*.*.*
Access IP 2....:
0.0.0.0
Access IP 3....:
0.0.0.0
Access IP 4....:
0.0.0.0
Access IP 5....:
0.0.0.0
Access IP 6....:
0.0.0.0
Access IP 7....:
0.0.0.0
With this menu the IP addresses or hostnames of the devices enabled for communication with
NetMan plus
can be config
ured. The character “
*
” can be used for one or more fields of the IP
address to indicate that all values between 0 and 255 are accepted in that field. The following table
provides some possible configuration examples.
IP Access
Description
*.*.*.*
All the devices present on the network are enabled to communicate with
NetMan plus
(default configuration)
10.1.10.*
The devices with addresses between 10.1.10.0 and 10.1.10.255 are
enabled to communicate with
NetMan plus
myserver.mydomain Hostname of the device enabled to communicate with
NetMan plus
